Build 101...top tips for designing bathrooms

Today we are talking bathroom details.  It's an expensive room and you want to get it right the first time.  Changes are going to cost you.  There are lots of decisions to make besides choosing the perfect tiles.


It is very important to have a detailed layout of the room.  You will want to give this plan to the builder, the tiler, and the plumber - all of them.  My old friend graph paper is your best friend here too.  Draw the room to scale, floor plans and elevations (what it looks like when you stand on the floor looking at the wall).  

Its a little time consuming, but its the best way for you to check how something is going to look, and much cheaper than making changes once the fittings are in.  If you have given a tradesman a scale drawing there is no room for misunderstanding, if it isn't what you drew they need to fix it at their cost.

Below is an elevation of one of our bathroom walls, I did similar drawings for each wall with fittings on it, and a floor plan.  

So lets get into it the detail.

Design decisions I would make again:
  • height of counter - 800mm
  • height of tap spout above basin - 1,050mm
  • position of tap - spout centered with plug hole
  • counter top and splashback - both caeserstone in white.  Caeserstone can be ordered in a single large piece so there are no tile lines to worry.  The finished look is very clean making the basins and tapware the hero, which is as it should be.  It is also warm to the touch unlike stone, good in winter.
  • tap fittings - I love the Brodware City Stik range and used them throughout the house
  • basins - Lavabo Solid Surface counter top vessels by CIBO.  Not to deep, they don't splash, and plenty of space for Mr B when he is shaving.
  • free standing bath - Kado Lure from Reece Bathrooms

Other decisions to consider:
  • Position of plug points for hairdryers etc - check your local code but usually have to be above counter height for electrical safety
  • Position of floor waste - check local code again, try and tuck it under the vanity, somewhere you don't see it as soon as you enter the room
  • Shower grates - I am a big fan of linear grates rather than a central waste.  Does depend on your tile choice and floor plan.
  • If you are using a white counter top make sure it matches the colour of your basins, you would be amazed how many tones of whites there are and they don't all match well.
  • Make sure the white of your basins tones in with the colour of your bath and toilet.
  • Storage, storage and more storage.  We have a full length double cupboard in the bathroom so we didn't need under counter storage.  Your bathroom will never look tidy unless there is space to pack everything away.  Plan enough storage that you never need have any products standing on the counters unless you are using them.

We made all five million of these decisions when we built four years ago and I learned so much along the way.  For more details you need to know to get the finish you want see the rest of the Build 101 series.

instagratification...a fabulous rug

Spotted this enormous 3x4m rug in hemp and chenille rug in papaya home on sale for $999.  It's enormous and a great base for every room.

Their other rugs are fab too and the price point is not bad.  For more instagram moments follow me here.

want want want list

Some inspirational styling from Karin Meyn to whet your appetite, and a few things on my want want want list.  



 I am slightly obsessed with these petrified wood sculptures.  Amazingly it is wood that has turned into a mineral but still looks like wood.  So badly want some of these.  The Sourceress has some beauties online.

Arteriors book ends - I don't need book ends but I still want these
And then there is lighting.  I am always on the look out for unusual lighting.  I really like the new Josh and Jenna range from Beacon.  Good prices and lovely materials, I think this copper and cement Gaston uplight would be fab in Miss E's room.  The bottom light is the Spence from the same range.  Sandwiched in between is the fabulous Pileo lamp by Porada.  A real feature piece but a feature price tag to match, but it could be a design classic, I love it.



Sigh... so pretty...

currawong cottage... a magical tree house

A magical tree house at Currawong Cottage built by Mr B for Miss J.  A place to play and dream and spot kangaroos.  Painted pink & orange (well coral because we couldn't mix orange) for fun & decorated with holiday craft jellyfish.  Magical memories in the making.

A wintry sky view.


Coral pink, next time we will make it more orange and build a wall and a door!

Tree house love - I had lots of trees to climb as child but never a tree house as cool as this one.
Book your stay at Currawong Cottage, the perfect spot to explore the Mornington Peninsula from.

Framed modern art...diy made easy with the right tools

I am feeling liberated.  After a morning tinkering with my new Ryobi Compound Mitre Saw and Ryobi Nail Gun and I am ready to take on a whole lot more wood work.  I am nervous of Mr B's saws, now finally I have one that I am confident to use on my own, no more waiting for help!  Today I tested them on a project that I have been wanting to try for a while, making a floating frame for a canvas.  It was a gratifyingly short job with the help of the Mitre Saw and the Nail Gun and I love how the finished piece looks below.  

A couple of things I really like about the Ryobi compound mitre saw:
  • it has a laser guide which allows you to cut exactly where you marked the wood.
  • a simple but effective clamp to hold the wood in place and make sure your fingers are nowhere near the blade.
  • a great sliding action for larger pieces which allows a really smooth cut and allowed good control.
  • An easy to use mitre setting, you simply swing the front arm until it gets to the correct angle that you want, then lock it firmly into position with the front lock.
You can see below how clearly the laser line marks the wood, it is easy to match to the pencil line and make a really accurate cut.


To make your own basic floating frame you will need:
  • Any canvas - mine was a failed painting hiding in the garage
  • Wooden trim slightly wider than the depth of the canvas frame
  • Enlarged photo copy an image you like ($7 for B1 size at Officeworks)
  • Magic tape
Make as follows:
  • Tape photo copy to the front of the canvas, like wrapping a one sided present.  Make the corners as neat as possible and tape down securely.
  • Cut long sides of wood trim - measure them to be the same length as the canvas sides and mark the cut line in pencil with a set square.
  • Turn the laser guide on, match up the red laser line with the cut on the wood and lock wood securely into place.  
  • Clamp both side pieces to the sides securely and get your nail gun.  (Love the nail gun) Nail trim at left, then at right.  Start at the side so that you can adjust the piece if you need to.  This is the work of minutes and really really fun!
  • Cut the trim for the top and bottom pieces of the frame.  Measure these pieces from the edges of the already attached trim.
  • Cut, clamp and nail gun in place as before.
Yes it really was that easy.




What I really liked about the Ryobi Airstrike nail gun:
  • This model compresses its own air and doesn't need a stand alone compressor or canisters.  Less things to hire, buy and store.
  • Not to heavy, easy enough for a non-chippy like me to use
  • An easy nailing action and the ability to set nail depth
  • I cannot hammer in a nail straight, but with the Air Strike...to easy.
I am going to be making so many things with these fab new additions to the tool shed.
Next time I am going to try something a bit more complicated and use all that fabulous mitre capability.  Can't resist a final action shot.



So this was really a very easy test, I just couldn't wait to make something and give you a little feedback.  Mr B will be putting them through their paces when he replaces the cladding in the Currawong Cottage entrance.  I am thinking I may make a tray next, I want to test out the mitre capabilities.

Tools were provided by Ryobi but all opinions are as always my own.